Filter
Top Products
Playing Other Picture CDs
56
Press and to move between the left
and right halves of the display.
Press ENTER to enter a folder or display
an image.
Transforming Images
Press to rotate the image 90° to the
right.
Press to rotate the image 90° to the
left.
Press to flip the image horizontally.
Press to flip the image vertically.
Programming Playback
You can program a slideshow sequence
using the PROG button.
To program a sequence:
1. Press PROG to bring up the program
display.
2. Find an image to be included in the
sequence, navigating as described in
“Navigating the Directory Structure”
on page 54.
3. Press the button to include the
image in the playback sequence. (Press
a second time to remove the image
from the sequence.)
4. Repeat steps 2–3 until all images to be
included in the sequence have been
marked.
5. Press ENTER twice to begin playing the
sequence. The marked images will
display in a repeating sequence.
Press PROG while the programmed
sequence is playing to turn off program
mode.
Program Mode
ROOT 1
UP_DIR
IMAGES 13
image
image
image
image
image
image
1
2
3
4
5
6
OMPD800.book Page 56 Thursday, September 21, 2006 1:39 PM