Filter
Top Products
different transmission channel within the receiver's range of 21 to 61.
4.4 Setting the UHF Output Channel
The procedure is as follows:
> Use the Menu key to select the Main Menu
> Now select the entry Settings, marking it in blue by using the up/down arrow keys
> Confirm by pressing OK
The sub-menu Settings will be displayed.
> Now use the up/down arrow keys to mark the line Audio/Video Settings
> Confirm by pressing OK.
The sub-menu Audio/Video will be displayed
> Now select the line UHF Out Channel, marking it in blue by using the up/down
arrow keys.
> Select a free UHF channel on your TV set in the range between 21 and 69.
> Finally, use the numeric key pad to enter the new output transmission channel in
your receiver's memory.
The receiver will now transmit the signal on the UHF channel shown in the display.
Should you still experience interference on the channel selected, please repeat the
procedure until you find a suitable channel, free from interference.
10
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 10