TechniSat TechniBox VIACAM DVD Player User Manual


 
7.6 Unblocking the parental lock for individual channels
Enter your PIN in order to get to the appropriate menu, then proceed as described in Point
7.3, removing individual red crosses by pressing the OK key. In this manner, individu-
al channels can be excluded from the parental lock control.
7.7 Programme Search
As mentioned previously, your receiver has been pre-programmed to receive signals from
the ASTRA and EUTELSAT satellites. In order to add new channels, or those received from
other satellites, there are four possibilities of carrying out a programme/channel search.
1. All
All satellites and transponders selected will be searched.
2. Satellite
Choose this option to find specific channels or bouquets.
3. Transponder
Choose this option to scan a specific transponder of a specific satellite. You can search for
all or selected programmes of a particular transponder.
4. Programme/channel
This option is intended specifically for cases where the desired channel could not be found
by any of the other options. Please note that to utilise this search method, you will have to
enter the specific Service ID Number of the channel, which you can obtain from the broadca-
ster, or from the Internet.
Once the search has been completed, the number of channels identified by your receiver will
be displayed on your screen, also stating how many of these are new channels. New chan-
nels are shown in yellow type in the Total List, and can be transferred to the User List in
accordance with Point 7 (Changing the Basic Programming).
> In order to search for programmes, press the Menu key to display the Main Menu
> Use the up/down arrow keys to mark the entry Search.
> Confirm with the OK key
The sub-menu >Search will be displayed.
35
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 35