Filter
Top Products
13
Connections and initial set up
Reinstalling channels (updating)
If new channels make their way into the audiovisual scene, you will have to update your DVD
recorder’s list of channels. In such a case,start a new channel search from the installation menu.
This set-up deletes all stored channels and resets all the channels that your DVD recorder can
receive. If you only want to set-up a single channel, refer to the manual search on page 12.
1. If the main menu is not displayed, press the MENU key on the remote control.
2. Select the Setup line using the ▲ or ▼ keys, and press OK to validate.
3. Select the Installation line using the ▲ or ▼ keys, and press OK to validate.
4. Select the Channel search line using the ▲ or ▼ keys, and press OK to validate.
An installation window will appear.A cursor shows the
progress in the set-up of the channels.When all the
channels that you can receive in your area have been
stored,
100 % is indicated. Press OK to return to the
Channel search line. Press MENU to return to the
Main Menu.
Sorting channels
1. If the Main Menu is not displayed, press the MENU key.
2. Select the Setup line using the ▲ or ▼ keys, and press OK to validate.
3. Select the Installation line using the ▲ or ▼ keys, and press OK to validate.
4. Select the Channel List line using the ▲ or ▼ keys, and press OK to validate. Refer to the
Channel Sorting paragraph to check or sort out the channels stored on your DVD
recorder.
EN
EN
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 13