Filter
Top Products
64
Menus
System Options
The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DVD recorder to match those of the devices
connected to it.
1. In the Main menu select the Setup line with the ▲ ▼
,
keys then validate with
OK.
2. Select the System options line using the ▲ ▼ keys, then validate with OK.
3. Select an function with the ▲ ▼keys,confirm with OK, adjust and confirm with the ▲ ▼ and
OK.
Note: the explanation of the various functions of this menu are
detailed below.The associated illustrations show the
corresponding adjustments or functions.
DivX
Selecting Divx displays the authorisation number.
Digital output (audio)
Depending on the amplifier or television (with or without integrated
decoder) connected to your DVD recorder,you will need to set the
DIGITAL AUDIO OUT sockets (coaxial or optical) so that they deliver
the Dolby Digital, DTS or MPEG digital signals supported by the other
device.Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby
Digital or DTS decoder (or both, depending on devices). MPEG must be
ticked to play a DVD disc on which the sound was recorded using MPEG
standard.
QSound/Qxpander
This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
amplifier.The sound effects of a 5.1 system are then simulated.
Note:The name and logo are registered trademarks of Qsounds Labs Inc.
Laboratories.The TruSuround
®
technology is used under license from SRS
Labs Inc. laboratories.
Your television set
Audio
output socket
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 64