Filter
Top Products
65
EN
EN
Menus
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by.Select Eco.Standby to enable this function.
Note
:
the Eco function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
same channels to the same numbers during installation of channels (page 6).
Note
:
this function is positioned by default on On.
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver),select RGB,
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
Note
:
format of image signals:
RGB: English signal colour code (Red – Green – Blue).This is best quality.
S-Video S-VHS (Y/C), signals with separate colour components and brightness.This is
average quality.
CVBS: composite video signals.This is poor quality.
Scart connector
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 65