Filter
Top Products
28
advanced operation
MENU LOCK
Simply locking a channel will not deflect a determined would-be viewer. Re-
installing the complete channel list, for example, will bypass the channel
lock. However, the menus can be locked out of use too, to prevent this.
Display the Main Menu by pressing the MENU key, highlight Configuration,
and press SELECT key to display the Configuration menu screen. High-
light the Parental Settings line of the menu (press
key four times) and
press SELECT key to display the Parental Settings menu (after the PIN
code has been entered). Here the menu lock-out can be set and the PIN
code changed.
With the Menu Lock line highlighted, use the
or key to cycle the
menu lock setting through Disabled, Main Menu and Installation. The Main
Menu setting will lock out the complete menu system; the Installation Menu
setting locks only the Installation menu (see Advanced operation - Re-instal-
lation); and the Disabled setting allows free access to any of the menus.
You must return to normal TV
viewing by pressing the MENU
key (three times) to activate the
lock. Now any attempt to access
the locked menus will display
the PIN request window and the
menus will only be displayed on
entry of the correct PIN code.
Hint
If you want the channel and
menu locks to work efficiently
and actually protect channels
from access, do change the
PIN code from the factory de-
fault. Make sure that you
choose a number that is not
obvious to others but one that
can be remembered by you.
The same Parental Settings menu
is used to change the PIN code.
With the Set Lock Key line highlight-
ed, press SELECT key to display
the Set Lock Key window. This re-
quests the new four-digit code to be
entered twice (for confirmation) and
the new code comes in effect when
you return to the Configuration
menu by pressing MENU key.
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:2928