Filter
Top Products
2
If your TV is fitted with a non-rewireable plug and you need to change the fuse,
you will need to refit the fuse cover. If you lose or damage the fuse cover, do not
use the plug until you have replaced the cover with a new one. You can get one
from us. Make sure you replace the fuse cover with one which is the same
colour as the markings on the fuse.
If you have to change the plug because it is not suitable for your socket or it is
damaged, cut off the plug and fit another one following the wiring instructions
below. Please throw away the plug you have removed, as insertion into a
mains socket could cause injury.
For your own safety, read the following instructions carefully before attempting
to connect this unit to the mains.
WIRING INSTRUCTIONS
Your TV is designed to operate on
230 V, 50Hz current only. Connecting
it to another power source may dam-
age the TV.
The wires in the mains lead are co-
loured as follows.
Blue = Neutral Brown = Live
IMPORTANT
The colours of the wires in the
mains lead from your TV may not be
the same as the coloured markings
identifying the terminals in your
plug. So please follow these in-
structions.
Connect the blue wire to the termi-
nal marked with the letter N or co-
loured black.
Connect the brown wire to the termi-
nal marked with the letter L or co-
loured red.
Do not connect any wire to the other
terminal on the plug.
If you use a 13 Amp (BS1363) plug,
you will need a 5 Amp fuse.
If you use any other type of plug, you
will also need a 5 Amp fuse either in
the plug or on the distribution board.
WARNING
To prevent electric shocks, remove
the plug from the mains socket be-
fore you take off its cover.
BLUE
(Neutral)
BROWN
(Live)
FUSE
Wiring the plug
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:292