Filter
Top Products
7
Before Switching on your TV
Power connection
Only use the adaptor supplied with this prod-
uct.
IMPORTANT: The TV set is designed to oper-
ate on 12 V DC. For this, an adaptor is used
which gives 12V DC voltage. Connect this
adaptor to a system that supplies 230V AC,
50 Hz.
After unpacking, allow the TV set to reach
the ambient room temperature before you
connect the set to the mains.
Connections to the RF input socket
Connect the aerial or cable TV plug to the
RF input socket located at the back of the
TV and connect the cable plug coming out
from the TV out socket located at the de-
vices (VCR, DVB etc.) to this socket as well.
How to connect other devices
IMPORTANT: Switch off the TV before con-
necting any external device.
Sockets for external connections are at the
back of the TV. For connection of other devic-
es via Euroconnector refer to the manuals of
the related devices.
Inserting batteries in the remote
control handset
Remove the battery cover located on
the back of the handset by gently pull-
ing upwards from the indicated part.
Insert two AAA (R03)/UM4 or equivalent
type of batteries inside.
Replace the battery cover.
NOTE: Remove battery from remote
control handset when it is not to be used
for a long period.Otherwise it can be
damaged due to any leakage of battery.
Old batteries must be disposed in a des-
ignated area. If performance of the re-
mote control reduces, replace the batter-
ies with the correct type. Do not combine
a used, old battery or a new one or
mixed battery types. Remove dead bat-
teries immediately to prevent acid from
leaking into the battery compartment.
Before Switching on your TV
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:297