Filter
Top Products
32
advanced operation
Hint
If an invalid number for the start
or end times or the date is en-
tered, Entered time is not valid.
message is displayed on the
screen.
Pressing MENU or SELECT key returns to the Timer screen with the set-
tings in place in the timer event list. The event mode is automatically set to
Active and you can now return to normal viewing (press the MENU key) and
at the appointed time the TV will switch over to the required channel and at
the end of the event, switch the TV to previous channel.
When the Timer screen is dis-
played, any event can be set to be
Inactive (so it will not occur) or the
channel, times and frequency
mode altered by highlighting the
event's Mode button and pressing
SELECT key as before.
You can exit the Timer screen and
return to normal TV viewing by
pressing MENU key.
Hint
If you are watching digital terrestri-
al TV at the time the timer event
starts, a message is flashed onto
the screen announcing that the
TV is 'Switching to timer channel'
so you understand what is hap-
pening.
While watching Analog TV broadcasting, you can get Digital TV broadcasting
from EXT-2. For this option you must set Av-2 Output in Feature menu to DIGI-
TAL mode. (See Analog TV section - Feature menu) Start and end time of Digi-
tal TV programmes can be set in Timers menu.
While watching Digital TV broadcasting, you can get Analog TV broadcasting at
that time from EXT-2. For this option you must set Av-2 Output in Feature menu
to TV. (See Analog TV section - Feature menu)
Event Timer
If timer action occurs when the TV is in stand-by mode, the TV turns on but no
picture is seen and no sound is heard.
Selected digital channel will be at the Scart-2 output. The selected channel can
be watched or copied via Scart-2. If timer action occurs while tv is watched, tv
switches to the selected channel. When timer expires, the TV switches to the
channel which it is switched from.
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:2932