Filter
Top Products
31
advanced operation
EVENT TIMER
You can also set a timer to switch the TV to any channel without your inter-
vention. This is intended for making video recordings of programmes when
you are out. If a single programme is to be recorded, the TV can be left
switched to the required channel and the timer set on the VCR. However, if
two or more programmes on different channels are to be recorded then the
timer is set as well, to select the required channel when it is needed.
Display the Main Menu by pressing the MENU key and highlight and select
the Timers line to display the Timer menu screen. Up to eight separate tim-
er events can be set and each is displayed in the Timer screen, showing the
event number, the channel to be selected, the start time, end time, date and
the mode - whether that event is active (and will be acted on) or not.
To set an event, highlight its mode button using the
or keys and
press SELECT key to display the timer entry window. Here the five settings
of channel name, start time, end time, date and frequency mode can be set.
You can move freely between each setting using the
and keys. The
channel name is set using the
or keys to display the channel which
broadcasts the programme to be recorded. The start time, end time and
date are each set with the number keys on the remote control in 24-hour
format. The frequency mode determines how often the TV operates this
event and is set with the
or keys to be either Once, Daily or Weekly.
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:2931