Filter
Top Products
48
Normally the Fine Tuning cursor is
placed next to the left side on the slider
and this is indicated with one arrow.
Setting VCR ( Video Cassette
Recorder ) Mode
This item can be seen in TV, AV-1, AV-2,
AV-3, S-VIDEO modes.
If you want to watch a VCR source from
one of these modes, then it will be bet-
ter to set VCR mode on. For this, while
the cursor is on this item press the
or
keys to set it On.
If you want to watch a DVD , then you
must set this item off; because DVD is
not a source like a VCR and to see the
picture better, you must set the VCR
mode Off.
To Store Settings
Press OK key on the remote control to
store the settings directly.
or,
Press
, or OK key on Store op-
tion to store Install menu settings.
Programme Menu
To enter Programme menu directly,
press the "
INFO" key in TV mode, or
Press "M" key, now you are in main
menu. In the main menu, select Pro-
gram using
or key. Then enter
the Programme menu, press
/
or OK key.
Moving cursor to four direction you can
reach 20 programmes in the same page.
By scrolling the pages up or down by
pressing the navigation keys you can se-
lect all the programmes in TV mode (ex-
cept the AV mode).
By cursor action, programme selection
is done automatically. In order to select
programme is also possible by using
digit or double-digit key. In this way pro-
gramme selection gets also automati-
cally. The TV Status is changed by the
programme selection too. When using
double-digit key in order to select a pro-
gramme, the Programme Number in TV
Status OSD is displayed in "P --" form,
and by pressing digit keys they are dis-
played in it.
Programme Number is between 00 and
99. Programme Name has a name
string with 4 characters. After autostore
process the Programme Names are set
to:
Channel search "C-01" or "S-01"
(band and channel number) or name
of the tuned channel if defined.
At the bottom of the menu there is a pro-
gramme sort functions section. Each
function is activated by color key (seen
above). Name allows changing the pro-
gramme name. By Delete you can delete
programmes that you decided. Insert
section is for inserting programmes into
another programme spaces. By select-
ing Autostore section, Autostore menu
will be available.
Name:
To change the name of a decided pro-
gramme, that programme is selected
and pressed to the Red key (Name). The
first letter begins to blink on the selected
name. To change that letter
or
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:3048