Filter
Top Products
29
TV operation
Labeling channels
1
Press MENU in the TV mode. The TV menu
screen will appear. Press ▲ or ▼ to select
“Channel” menu, then press ▶ or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select ENTER:Set
2
Press ▲ or ▼ to select “Ch Label”, then
press ▶ or ENTER.
The “Ch Label” menu will appear.
: Select ENTER:Set
Channel
Add/Delete >>
DTV Signal >>
>>
Auto Ch Memory
Ch Label >>
3
Press ◀ or ▶ to select a channel you want to
label, then press ▼.
Ch Label
Label Clear >>
: Adjust
Ch Label
Channel Number 15-1
: Select
4
Press ◀ or ▶ repeatedly until the character
you want appears in the first space.
Label Clear >>
: Adjust
Ch Label
Channel Number 15-1
: Select
Ch Label A
ENTER:Set
The characters rotation as follows:
SPACE
-
, () @ / + =
-
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the
characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
5
When you finish inputting the label name,
press EXIT/CANCEL to return to the normal
screen.
6
Repeat steps 3-5 for other channel. You can
assign a label to each channel.
To clear a Ch Label
After step 3 above, press ▲ or ▼ to select “Label Clear”,
then press ▶ or ENTER.
Note:
The channel labels will be reset after “Automatic
Search” on page
24
.
•
Labeling channels
Channel label appear with the channel number display each time you turn on the
TV/DVD, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
/ / /
MENU
EXIT/CANCEL
ENTER
52G0101A P14-29.indd 2952G0101A P14-29.indd 29 1/5/09 3:03:09 PM1/5/09 3:03:09 PM