Filter
Top Products
Advanced playback
50
Press / / / to view a different part of the
frame.
You may move the frame from
the center position to UP, DOWN,
LEFT or RIGHT direction.
In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view ( Off).
Zooming
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change
the ZOOM
1 (x 1.3), 2 (x 1.5)
and 3 (x 2.0).
Zooming/Locating desired scene
This unit will allow you to zoom in on the frame image. You can then make
selections by switching the position of the frame.
Use the title, chapter and time recorded on the DVD disc to locate the
desired point to playback. In the case of VCD/Audio CD discs, time and
track are used to locate the desired point to playback.
To check the title/track, chapter/track and time, press DISPLAY.
1
Note:
• In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. To turn off PBC, see page
56
.
• Only Time search function can be used for DivX® CD.
Locating desired scene
DVD
VCD
CD
Press Number buttons (0–9) to input the number.
Note:
• You can select the Pause, Slow or Search playback in the
zoom mode.
• Some discs may not respond to zoom feature.
• Zoom function can be used for DivX
®
CD.
Press JUMP during playback or resume stop mode.
Press or to select the “Title/Track”,
“Chap-
ter” or
“Time”
.
1
Time
Title
Chapter
Jump
Time
Title
Chapter
Jump
Time
Title
Chapter 12
Jump
DVD
VCD
CD
1
2
3
• If you input a wrong number, press
EXIT/CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
2
3
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1 of
the selected title.
• Some discs may not work in the
above operation.
0–9
/ / /
ZOOM
EXIT/CANCEL
DISPLAY
JUMP
ENTER
52G0101A P50-57.indd 5052G0101A P50-57.indd 50 1/5/09 3:06:18 PM1/5/09 3:06:18 PM