Filter
Top Products
Se_ingupyourTV 49
Stor#_g c'ham_elsit_memol_ (optiot_al)
3 Open the Channel Tuning menu, highlight ANT/CABLE In,
and then press the OK button.
(Sample Image) Cham_el tm_i_g metal - It_put co_figuratio_
selecdo_
4 Press the A/T (arrow) buttons to select the input source (Cable
or Antenna), and then press the OK button to save your new
settings.
Storingcl annelsinmemory(opUonal)
To make sure your TV stops only on the channels you want when
you press the A/T (arrow) buttons on the remote control or the
control panel, store those channels in the TV's memory.
AutoTuning
You can set up the TV to detect all active channels in your area and
store them in its memory. Then you can manually add or erase
individual channels from memory.
NOTE ¢. YoumustsetuptheANT/CABLEinputsourcebefore
programmingchannels.See"ANT/CABLEIN"onpage48.
¢ Theautomaticchannelprogrammingprocesswillerase
channelsthatwerepreviouslyprogrammedintotheTV's
memory.
¢ TotunetheTVtoachannelnotprogrammedinthechannel
memory,youmustusetheChannel Number buttonsonthe
remotecontrol.
¢ ProgrammingchannelswhentheANT/CABLEinputis
configuredforCablewilltakesubstantiallylongerthanwhenthe
antennainputisconfiguredforAntenna.Thisisnormal;
however,oncechannelprogrammingis finished,youshouldnot
havetorepeattheprogrammingprocessagainunlessyourCable
TVservicelineupchangessignificantly.