Filter
Top Products
SettingupyourTV QQ
No 5'i_al Power Down
Press the Number buttons to enter the length of time
(maximunl of 12 hours) and then press the OK button. Or press
the A/T (arrow) buttons to increase or decrease in 10-minute
increments (nlaxinmm of 12 hours).
NOTE Ifapowerfailureoccurs,thesleeptimersettingmaybecleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.
NoSignalPowerDown
The TV wilt automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Offfor the
following purposes:
•*** Low signal strength of analog channel (no signal detection)
•*** Only Audio L/R is connected to external input to listen to music
through the TV speakers.
To change the no signal power down setting:
1 From the Options menu, highlight Power Management, and
then press the OK button.
2 Highlight No Signal Power Down, and then press the OK
button.
3 Press the A/T (arrow) buttons to highlight the item you want
to change, and press the ,_/_ (arrow) buttons to select On or
Off.
NOTE '¢* DefaultsettingforthisfeatureisOn.
¢, Awarningmessagewillappear1minutebeforetheTVturnsoff.
UsingHOMPCEC
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI _ CEC compatible devices from the TV
remote via HDMI _ (see "HDMI(R)CEC connection" on page 31)
When Enable HDMI CEC Control in the HDMI CEC Control
Setup menu is set to On (see "Setting up HDMI(R?CEC" on page 96),
the HDMI _ CEC functions described below will be enabled.