Filter
Top Products
Chapter 2: Connecting your TV
1
Connecting a VCR with S-video and a cable box
An S-video connection will provide better picture performance than a standard (composite) video cable.
IN from ANT
VIDEO AUDIO
OUT to TV
L R
R
L
OUT
IN
CH 3
CH 4
IN
OUT
CH 3
CH 4
You will need:
coaxial cables
S-video cable
Do not connect both types of video cable to VIDEO 1
at the same time or the picture performance will be
unacceptable.
standard audio cables
If you have a mono VCR, connect L/MONO on the TV
to your VCR’s audio out terminal using the white audio
cable only.
Note: When you use a Cable box, you may not be able to use
the remote control to program or access certain features on
the TV.
•
•
−
•
−
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT video input source on
the TV.* Tune the TV to channel 3 or 4 (whichever channel
the Cable box output is set to). Use the Cable box controls to
change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
*
From Cable TV
Cable box
Stereo VCR