Filter
Top Products
32
Selecting the video input source
to view
To select the video input source to view:
Press on the remote control or TV control panel.
And then either:
a) Press numeric key 0~7 directly; or
b) Repeatedly press on the remote control and then
press to change the input; or
c) Repeatedly press on the remote control or TV
control panel to change the input.
Note:
“No Signal” will appear randomly on the screen if no signal
is received in video input mode.
Tuning channel
Favorites Browser
The Favorites Browser allows you to quickly set up a favorite
channels list and let you jump to prefer channel easily (Highlight
Channel number then press ).
To add a favorite channel:
Tune to the channel number that you prefer.
Press button, a new set of Favorite Channel
Set Menu will appear as below.
1�
2�
•
1�
2�
Press button to add the current display channel to
favorite browser list.
To delete a favorite channel:
Press button to open the favorites channel set
menu.
Press buttons to highlight the channel then press
button to delete it.
Tuning to the next programmed channel
To tune to the next programmed channel:
Press or on the remote control or TV control panel.
Note: This feature will not work unless you program channels
into the TV’s channel memory ( page 30).
Tuning to a specic channel (programmed
or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, then .
Tuning digital channels:
Press the Channel Number (0–9) on the remote control,
followed by the dash ( ) button and then the sub-channel
number. For example, to select digital channel 125-1, press 1,
2, 5, –, 1, then .
Note: If a digital channel is not programmed—either through
the automatic channel scan ( page 30) or the channel
add/delete function ( page 30)—you will have to tune the
RF channel using the Channel Number and dash ( ) on the
remote control.
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
Select the first channel you want to view.
Select a second channel using the Channel Number
buttons (and the dash ( ) button if selecting a digital
channel).
Press on the remote control. The previous channel
will display. Each time you press , the TV will switch
back and forth between the last two channels that were
tuned.
3�
1�
2�
1�
2�
3�
Chapter 6: Using the TV’s features