Filter
Top Products
Chapter 6: Using the TV’s features
42
Setting the time zone
To set the time zone:
Press and open the Prefer menu.
Highlight Time Zone.
Press or to select Pacific, Alaska, Hawaii, Eastern,
Central and Mountain.
Pacific
Alaska
Hawaii
Eastern
Central
Mountain
Pacific
Note: After you change the Time Zone setting, when you
press , you will see that the program duration has been
changed. For more details on , see" To display TV
status information using INFO" section on this page.
Displaying TV status information
To display TV status information using RECALL:
Press on the remote control.
The following information will display (if applicable):
Current input (Video 1, Video 2, etc.)
Channel number (if in ANT mode)
Channel label (if set)
Digital signal strength indicator (bar graph in top right
corner of box)
Stereo or SAP audio status
Video resolution
Aspect ratio of incoming video signal (4:3 or 16:9)
V-Chip rating status
To close the RECALL screen:
Press on the remote control.
1�
2�
3�
•
•
•
•
•
•
•
•
To display TV status information using INFO:
Press on the remote control.
The following additional information will display for off air
digital channels (if applicable):
Title
Duration
Detailed description
To close the Information screen:
Press on the remote control.
Understanding the auto power off
feature
The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the
TV when the power is resupplied.
Note: You should unplug the TV’s power cord if it is possible
that you will be away from the TV for an extended period of
time after the power is restored.
•
•
•