Toshiba 42AV500U Flat Panel Television User Manual


 
Chapter 7: Using the TV’s advanced features

Using the static gamma feature
The static gamma feature allows you to adjust the levels of
black in the picture.
To adjust the static gamma settings:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight Static Gamma and press , a new
adjustment bar will appear as below.
In the Static Gamma field, press t or u to adjust the
static gamma.
The adjustment range is within ±5 from center.
If the setting is moved in the minus direction, the detail
of black colors will be decreased.
If the setting is moved in the plus direction, the detail of
black colors will be increased.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.
1�
2�
3�
4�
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
A 480i signal from the VIDEO 1, VIDEO 2 input.
A 480i, 480p, 720p, 1080i signal from the HDMI input.
Aspect ratio of
signal source
Automatic aspect size (automatically
selected when Auto Aspect is On)
4:3 normal Natural (with sidebars)
16:9 full Full
Not defined
(no ID-1 data
or HDMI
aspect data)
The current picture size you set under
“Selecting the picture size” on page 33.
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
To turn on the auto aspect ratio feature:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight Auto Aspect Ratio and press u or to
select On or Off.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
1�
2�
3�