Filter
Top Products
126
Picture and Sound Controls
Adjusting the audio
Adjusting the range
You can adjust bass and treble.
1 Press the MENU button. Select SETTINGS, SOUND, and
then Bass or Treble.
2 Press the ( / arrow) buttons to adjust the range, and then
press the EXIT button.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
®
Digital decoder or other digital audio systems to the TV’s
DIGITAL AUDIO OUT terminal.
1 Tune to a digital source on the ANT/CABLE input.
2 Press the MENU button. Select SETTINGS,
PREFERENCES, AV Connection, and then press the OK
button.
3 Press the ( / arrow) buttons to select Digital Audio Output.
4 Press the ( / arrow) buttons to select Auto or PCM. Press
the EXIT button.
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital and Dolby
®
Digital Plus
dynamic range so you can switch from digital to analog broadcasts
at the same dynamic range.
1 Press the MENU button. Select SETTINGS, SOUND, and
then Dynamic Range Control.
2 Press the ( / arrow) buttons to select On.
This feature is available when Dolby
®
Digital or Dolby
®
Digital Plus
is input to the TV in the following situations:
❖ When tuned to a digital RF channel
❖ When an HDMI
®
input is used
This feature is automatically set to Off when Dynamic Volume
(Audyssey Dynamic Volume
®
) is set to Low or High.
This feature will also affect Digital Audio Output when the optical
audio output format is set to PCM.
NOTE