Filter
Top Products
131
Advanced features
Setting up the Network
Setting up the Network
You can select the Network Type.
1 Press the MENU button. Select NETWORK > Network
Setup, and then press the OK button.
2 Press the ( / arrow) buttons to highlight Network Type.
3 Press the ( / arrow) buttons to select Wired or Wireless.
4 If you select Wired, see “Advanced Network Setup” on
page 136. If you select Wireless, see the next section.
Wireless Setup
Continued AP (Access Point) connection is not guaranteed.
Connection may be lost while watching TV.
There are three methods for wireless setup:
❖ Easy Setup (WPS)
If AP supports WPS, this can be used.
❖ WPS is a standard designed to simplify the connection of
wireless LAN equipment and the setup of network security
features.
❖ Assisted Setup (setup using the AP's notification information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You need to manually set
the Security Key.
❖ Manual Setup
Requires manually entering all settings.
In order to secure your home network, it is strongly recommended
that you use a wireless access point with encryption.
Easy Setup using PBC (Push button configuration)
1 Press the MENU button. Select NETWORK > Network
Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Wireless Setup, and
then press the OK button.
3 Press the ( / arrow) buttons to select Easy Setup, and then
press the OK button.
NOTE
NOTE