Filter
Top Products
168
Advanced features
Network Device Setup
Only the 0-9, dash (-), and capital A-Z characters may be used for
the user name and password.
Setting up the Media Renderer feature
The TV can be configured as a Media Renderer. When operating as
a Media Renderer, the TV displays content provided by a Media
Server. The selection of the media is done by the Media Controller.
The TV can play photo, movie, or audio files when operating as a
Media Renderer.
Installation
You can configure the Media Renderer settings individually, or use
Installation mode to be prompted for each setting in order.
1 Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Media Renderer
Setup, and then press the OK button.
3 Press the ( / arrow) buttons to select Installation, and then
press the OK button.
4 Press the ( / arrow) buttons to select On, and then press the
OK button. If you want to change the device name as a Media
Renderer, highlight the Device Name field and press the OK
button. The Software Keyboard screen appears.
5 Input the device name by using the Software Keyboard. To
save your setting, press the BLUE button.
6 Select Done. Press the OK button.
7 If you want to limit access from unexpected Media Controllers,
press the ( / arrow) buttons to select On. Press the OK
button.
8 If you want to proceed with registration of Media Controllers,
press the ( / arrow) buttons to select Yes. Press the OK
button.
9 Press the ( / arrow) buttons to select the MAC address of
the Media Controller you want to accept. Press the OK button.
The box is selected. To clear the selection, press the OK
button.
10 Press the right arrow button to select Done. Press the OK
button.
NOTE