Filter
Top Products
169
Advanced features
Network Device Setup
11 Press the ( / arrow) buttons to adjust to the desired volume.
Press the OK button.
12 If you want to wake up the TV by using the Media Controller,
press the ( / arrow) buttons to select Yes. Press the OK
button.
Device Name setup
The device name as a Media Renderer can be changed.
1 Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Device Name Setup,
and then press the OK button.
3 Select the Device Name field. Press the OK button. The
Software Keyboard screen appears.
4 Input the device name by using the Software Keyboard. To
save your setting, press the BLUE button.
5 Select Done. Press the OK button.
The maximum number of characters allowed for the device name is
15. Only 0-9, A - Z can be used in the device name.
Media Controller setup
You can limit which Media Controller can control this TV. If
Access Control is enabled, only those Media Controllers with a
check will be allowed to control the TV.
1 Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Media Renderer
Setup, and then press the OK button.
3 Press the ( / arrow) buttons to select Media Controller
Setup. Press the OK button.
4 Press the ( / arrow) buttons to highlight Access Control.
Press the ( / arrow) buttons to select On.
5 Press the ( / arrow) buttons to select Media Controller.
Press the OK button.
6 Press the ( / arrow) buttons to select the MAC address of
Media Controller you want to accept.
NOTE