Filter
Top Products
72
43" / 49" / 55" / 65" 2160p 60Hz LED Google Cast™ TV
www.tv.toshiba.com
2 Press MENU, press
S
or
T
to highlight
Installation, then press OK.
3 Highlight Channel Tuning, then press OK.
4 Highlight Auto Tuning, then press OK. Press OK
again to start the scan. Your TV scans for available
channels. The scan may take several minutes.
5 When the scan is complete, press EXIT to close the
menu. Your TV tunes to the first scanned channel.
Manually adding channels to the channel list
Channels with weak signals may not be added to the
channel list when you scan for channels. You can
manually add a channel to the channel list if you
know the channel number and the channel has a
good signal strength. (Use the number buttons on
virtual remote control to enter the channel number.)
1 Press MENU, press
S
or
T
to highlight
Installation, then press OK.
2 Highlight Channel Tuning, then press OK.
3 Highlight Manual Tuning, then press OK.
Notes
• If you created a 4-digit PIN, enter your
PIN to start scanning. For more
information, see Setting a new PIN on
page 74.
• You can press EXIT to stop the auto
channel search, but you will need to
run the auto channel search again to
create a channel list.