Filter
Top Products
English - 41
System Setup
VCR Setting
If you want your VHS Video tapes to play automatically
when you insert them, turn on Auto Play.
Select “System”
Use the buttons to highlight “System” then
press the OK button.
3
Programme
Only tapes that are missing the Record Safety
Tab will play automatically when inserted.
Note
Select Change Password using buttons,
then press the
or OK button.
• The ‘Enter the password.’ message will be
displayed.
1
Enter the 4-digit password using the 0 to 9 but-
tons on the remote control.
• The ‘Confirm the password.’ message will be
displayed.
2
Enter your password again using the 0 to 9 but-
tons on the remote control.
3
About the Change Password;
Press the RETURN or ¥ button to return to
the previous menu. Press the MENU button to
exit the menu.
Note
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2