Filter
Top Products
30 - English
System Setup
To change the programme’s name, press the
button. The first letter of the name flashes.
9
Press the buttons until the NAME is select-
ed. The station name is set automatically from
the broadcast signal.
8
Presetting the Stations
Manually
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “Install”
Using the buttons, move the selection bar
to “Install”, then press
or OK button to select.
3
Select “Manual Setup”
Move the selection bar to “Manual Setup”, using
the
buttons then press or OK button to
select.
4
: Ch 60
Programme
Press the buttons to select a PR number
as required then press
or OK button to select.
5
Press the button to select Edit.
Then press
or OK button to be displayed
“Manual Setup” menu.
6
Press the ¥buttons to start scanning the
channels.
The frequency band is scanned and the first sta-
tion found is displayed.
7
Programme
Edit
Delete
Swap
If you have already set then automatically, you do not
need to preset the stations manually.
Manual Setup
PR
CH
Name
01
Done
- - -
- - - - - -
- - - -
MFT
Manual Setup
PR
CH
Name
01
5
Done
- - - - - -
A - - -
MFT