Filter
Top Products
English - 65
Playback
Insert VHS Video tape
Insert a standard VHS Video tape into the VCR
deck.
• When a videotape is inserted, power will turn
on automatically.
1
Adjust Tracking Manually
During playback, press the PROG/TRK /
buttons to remove white lines from the picture.
1
Play Tape
Press the
II
(PLAY/
PAUSE
) button on the
remote control or on the front panel of the unit.
The videotape will begin to play automatically if it
is missing the Record Safety Tab and Auto Play
is turned on. See pages 41~42.
2
Stop Playback
Press the
(STOP) button on the remote control
or on the front panel of the unit.
3
To play a standard VHS Video tape, videotape, just
insert it into the VCR deck and press the PLAY button.
You can turn on the Auto Play to enable the VCR deck
to play automatically when you insert a videotape that is
missing the Record Safety Tab. See pages 41~42.
Playing the VCR
The Tracking adjustment removes the white lines that
sometimes appear during playback because of slight dif-
ferences in recording decks. You may also set tracking
manually.
Tracking