Toshiba D-VR3SB DVD VCR Combo User Manual


 
English - 71
Recording
Use the PROG/TRK / buttons or number
buttons to select the station to record.
1
Making a One Touch
Recording (OTR)
DVD-RAM
DVD-RW
DVD-R
One-Touch Recording (OTR) allows you to add record-
ing time in 30-minute increments up to 9 hours at the
touch of a button.
Start Recording.
Follow the instructions on page 70 to begin
recording.
2
Activate OTR.
While in Record mode, press the REC button
again to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder-VCR will record
for exactly 30 minutes.
3
Add Recording Time.
Continue pressing REC to add recording time in
30 minute increments up to 9 hours.
• The DVD Recorder-VCR stops recording auto-
matically when the time has elapsed.
4
To enter a Videoplus+, press the VIDEO Plus+
button. Press the
 and or OK buttons to
select Videoplus+.
• A message is displayed to allow you to enter
the Videoplus+ code.
• If all twelve programmes have been set, the
message Timer is full is displayed. Refer to
page 76 if you wish to cancel a preset record-
ing.
1
Using the Videoplus+
Feature
Before presetting your DVD Recorder-VCR:
• Switch on both the television and your DVD Recorder-VCR
• Check that the date and time are correct
• Insert the cassette or Recordable DVD on which the
programme is to be recorded (safety tab intact) Up to twelve
programmes can be preset.
Disc Manager
Playlist
VIdeoPlus+
Programme
DVD-RAM(VR)
Standard Timer
VIdeoPlus+ Extended :Off
Programme
Press the numeric buttons to enter the code
opposite the programme that you wish to record
in your television magazine.
• If you wish to correct the Videoplus+ code that
you are entering:
- Press the ¥ button until the digit to be
corrected is cleared
- Enter the correct digit
2
Video Plus+
DVD-RAM(VR)
Enter Video Plus+ Code number.[0-9]
Disc Manager
Programme
Playlist
Æ REC Æ 30 Æ 1’00 Æ 1’30 Æ 2’ Æ 2’30 Æ 3’
9’
Å 8’ Å 7’ Å 6’ Å 5’ Å 4’ Å 3’30
Æ