Filter
Top Products
12
SPECIFICATIONS
Model name P600DL
Type 60-inch rear projection unit
Acceptable signals Refer to page 13 and page 14.
Image device 1 chip XGA Digital Mirror Device
(R)
Light source 120W UHP lamp
Resolution 1024 x 768 dot (Include part hidden with screen frame)
Brightness 300cd/m
2
(Typ.)
Screen Fresnel sheet (internal), Lenticular sheet (external)
Screen frame 0.7mm average
Viewing Angle Horizontal: Min. 150 degrees, Vertical: Min. 60 degrees
Color temperature
Selection of three user defines
Operating temperature
5-35 ℃ (41-95
F)
Operating humidity 30-70 % (Relative humidity non-condensing)
Power requirement AC100-240V, 50/60Hz, 200W (200VA)
Dimensions 1200.6 (W) x 1161.9 (H) x 754.7 (D) mm (48 x 45.7 x 29.3 inches)
protrusions not included
Weight 70kg
Accessories Owner’s Manual, DVI link cable, RS232C link cable, Assembly parts
Video Input Terminal Not available (Optional Video Input Card : BNC IN/OUT)
Level (Optional Video Input Card : 1.0Vp-p composite video, PAL/NTSC)
RGB Input Terminal RGB-1 input / RGB-2 input: HD D-sub 15pin (female) connector x 2
Level R/G/B signal: 0.7Vp-p (75-ohm termination)
H.SYNC / V.SYNC / C.SYNC signals: TTL
External control System: RS-232C, Terminal: D-sub 9pin (female) connector x 1
Speed: 1200, 2400, 4800, 9600 baud
Communication Link System: RS-232C, Terminal: D-sub 9pin connector x 2 for IN and OUT
Digital Signal Link System: TMDS, Terminal: DVI-D 24pin connector x 2 for IN and OUT
Remote Control Terminal 3.5mm terminal for optional Remote Controller
The Digital Signal Link is used for signal transmission between projection units and this does not
support external input signal.
The specifications and design of this product are subject to change without notice.
○