Filter
Top Products
20
Basic setup (VCR)
Preparation:
Turn ON the TV and select to the corresponding
video input.
Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Example:
Setting the clock to “8:30 AM” March, 31
(SAT), 2007.
•
•
1
Press VCR MENU.
2
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.
MENU
ON OFF
TIMER REC SET
SYSTEM SETUP
AUTO REPEAT
3
Press SET + or – to select “CLOCK SET”, then
press ENTER.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
4
Press SET + or – to set the month, then press
ENTER.
〈+/
–
/ENTER/CANCEL/MENU
〉
MONTH
DAY
YEAR
TIME
3
1 (THU)
2007
12 : 00
AM
5
Set the day, year and time as in step 4.
6
After setting the clock, date and time starts
functioning automatically.
VCR DVD
Clock setting
Clock setting/Noise elimination
VCR MENU
ENTER
SET +/–
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
A Blue back screen can be obtained by selecting the NO
NOISE BACKGROUND to “ON”. When the unit is shipped
from the factory, the NO NOISE BACKGROUND is set to “ON”.
1
Follow steps 1~2 on the left and press
SET + or – to select “NO NOISE
BACKGROUND”.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/
-
/ENTER/MENU
〉
2
Press ENTER to select “ON” or “OFF” position.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/
-
/ENTER/MENU
〉
3
Press VCR MENU repeatedly until the menu
screen is cleared.
Noise elimination
You must set the date and time for timer recording.
Note:
While NO NOISE BACKGROUND is off and no signals come
into the external input, the screen becomes black and signs
such as “LINE1” will not be displayed.
CANCEL
2K10101A.indb 202K10101A.indb 20 12/22/2006 5:07:31 PM12/22/2006 5:07:31 PM