Filter
Top Products
22
Playback (VCR)
PLAY
STOP
FWD
REV
VCR DVD
Cassette tape playback
To play a pre-recorded tape.
Playback Rewind or forward the tape
Preparation:
Turn ON the TV and select the corresponding video
input.
Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light).
•
•
1
Load a pre-recorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
2
To start playback
Press PLAY.
Playback will start. “ ▶ ” will appear on
the screen for about 4 seconds.
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
“■” will appear on the screen for about
4 seconds.
Notes:
This VCR selects the playback tape speed SP, LP or SLP
automatically.
The cassette tape and DVD disc can be played back
simultaneously. If you press VCR DVD selector, the tape
playback and DVD playback alternate with each other on the
screen.
•
•
Stop the playback via STOP on remote control.
To rewind the tape:
Press REV.
To forward the tape:
Press FWD.
To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
■ Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture
search mode (see page
23
). To do this, press REV or
FWD and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.
2K10101A.indb 222K10101A.indb 22 12/22/2006 5:07:32 PM12/22/2006 5:07:32 PM