Filter
Top Products
26
Recording (VCR)
Preparation:
Connect the AUDIO (L/R)/VIDEO IN jacks on the rear
panel (LINE IN 1) to the AUDIO (L/R)/VIDEO OUT
jacks of the Cable/Satellite box.
14
Turn ON the TV and select to the corresponding
video input.
Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
•
•
•
1
Load a cassette tape with the erase prevention
tab intact.
The DVD/VCR will automatically turn
on.
2
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about
4 seconds.
00 : 00 : 00 SP
3
Press INPUT SELECT to select “LINE1” input
position.
“L1” will appear on the display.
4
Select the channel you wish to record on your
cable/satellite box.
5
Press REC/OTR.
“ ” will appear on the screen for
about 4 seconds and “REC” will
appear on the display window.
LINE1
INDEX
Recording a TV program
Recording a TV program
REC/OTR
STOP
VCR DVD
SP/SLP
INPUT SELECT
PAUSE/STEP
Press PAUSE/STEP to avoid recording unwanted
material. Press again to continue the recording.
“ ” will appear on screen for
about 4 seconds.
Notes:
The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
You can select a recording channel in the recording pause
mode.
•
•
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
To stop recording
Press STOP to stop recording.
“ ” will appear on screen for about
4 seconds.
To stop recording temporarily
2K10101A.indb 262K10101A.indb 26 12/22/2006 5:07:34 PM12/22/2006 5:07:34 PM