Filter
Top Products
Other functions (VCR)
31
Other functions (VCR)
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a
previously recorded tape. Make all connections before turning on the power.
Duplicating a video tape
Connection with second VCR
Connection with Camcorder
AUDIO/VIDEO cable (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown above.
REC/OTR
STOP
SP/SLP
INPUT SELECT
VCR DVD
Preparation:
Turn ON the TV and select the corresponding video input.
Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
Load a cassette tape with the erase prevention tab intact.
Load a previously recorded tape into the playback VCR or
Camcorder.
•
•
•
•
1
Press SP/SLP to select the desired tape speed
SP or SLP.
It is recommended to set the tape
speed to the SP mode on the
recording VCR for best results.
2
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
“L1” or “L2” will appear on the display.
L1: on the rear panel
L2: on the front panel
3
Press PLAY on the playback VCR or Camcorder.
4
Press REC/OTR on the recording VCR.
The duplicating process begins.
5
Press STOP when you finish duplicating.
To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
Recording VCR
To AUDIO (L) IN
To VIDEO IN
To AUDIO (R) IN
2K10101A.indb 312K10101A.indb 31 12/22/2006 5:12:03 PM12/22/2006 5:12:03 PM