Filter
Top Products
27
Playback (VCR)
Press CLOCK/COUNTER. The clock and tape counter
alternate with each other in the display window.
COUNTER CLOCK
Press VCR DVD selector. The DVD mode and the VCR
mode alternate with each other in the display.
DVD mode VCR mode
Notes:
If you rewind the tape beyond “00:00”, a minus sign (“–”) will
be displayed in front of the time.
When you load a tape, the counter will reset to “00:00”.
The counter does not function on non-recorded (blank)
sections of the tape. When you rewind, fast forward or play
tapes through blank sections, the counter stops.
•
•
•
Video head cleaning
■ Video head clogging
The video heads are the means by which the
DVD/VCR reads the picture from the tape
during playback. In the unlikely event that the
heads become dirty enough to be clogged,
no picture will be displayed. This can easily
be determined if, during playback of a known
good tape, there is good sound, but no picture
(picture is extremely snowy). If this is the case,
the DVD/VCR need to check and clean by the
qualified service personnel.
Notes:
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR
SERVICE THE UNIT BY REMOVING THE REAR COVER.
Video heads may eventually wear out and should be
replaced when they fail to produce clear pictures.
To help prevent video head clogging, use only good quality
VHS tapes. Discard worn out tapes.
•
•
•
Good Picture
Snowy Picture
Convenient function
To cancel repeat mode:
Follow the above step 1, then press ENTER to select “OFF”
position. Press VCR MENU to return to the TV screen.
The entire video tape will play until its end. The tape will automatically
rewind to the beginning and the playback will be repeated.
Repeat playback
This function rewinds the tape to the “00:00” counter position
automatically.
1
Press CLOCK/COUNTER.
The counter display shows the tape running time
during playback or recording.
•
2
Press COUNTER RESET at the desired tape position.
The counter display will be reset to “00:00”
position (e.g. the beginning of recording).
•
3
Press STOP when playback or recording is completed.
Press ZERO RETURN.
The tape will automatically rewind or fast forward
to the “00:00” counter position.
•
Zero return function
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX mark
The Index Search function automatically records an
INDEX mark on the tape whenever a recording is initiated.
Index search
Press INDEX + or – during stop or play mode.
For Succeeding programs: Press INDEX +.
For Preceding programs: Press INDEX –.
(As many as 9 index points can be accessed via this
method.)
When the INDEX
+
or
–
is
pressed, the unit starts searching
the selected INDEX NO. and finds
the portion. Then playback starts
automatically. To stop the Index
Search, press STOP.
INDEX NO. (up to 9)
or is displayed
Notes:
When you record an INDEX mark at the very beginning of
the tape, the mark may not be found.
During INDEX search, the tape may stop and begin to play
at a slightly different location.
INDEX may not function properly with old or worn out video
tapes.
INDEX marks may not be found if it is extremely close to the
point where the search began.
During recording, if you stop recording temporarily, the
INDEX mark is not recorded on the tape.
•
•
•
•
•
Clock/counter display
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
S-VHS system.
However, the picture will not have the high resolution of
S-VHS system.
Note: You cannot record S-VHS video format with this VCR.
Video index search system
1
Press VCR MENU.
Press SET + or – to select “AUTO REPEAT”.•
2
Press ENTER to select “ON” or “OFF”.
If “ON” is selected, the playback will be repeated
endlessly.
•
3
Press VCR MENU repeatedly until the menu screen
is cleared.
To confirm whether AUTO REPEAT function
is turning ON or OFF, press CALL. If “ ” is
displayed, it is turning ON
11
.
•
4
To commence playback, press PLAY.
The playback will be repeated endlessly.•
2K60121A.indb 272K60121A.indb 27 1/12/2007 3:50:11 PM1/12/2007 3:50:11 PM