Filter
Top Products
34
Playback (DVD)
VCD
Program playback
1
Press PLAY MODE during stop mode.
2
Press ▲/▼ to select “Mode”, then press ENTER
repeatedly to select “Program”.
3
Press ◀/▶ to select the programming position. Use
Number buttons (0–9) to input the track numbers.
If you input a wrong number, press CLEAR.•
4
Press ◀/▶ to return to the left column, then press ▲/▼
to select the “Program Playback” and press ENTER.
The programs you selected will start to playback
in order.
To resume normal playback, select Mode “Off” in
step 2.
•
•
You can arrange the playback order of tracks on the disc. This
feature works for Video CD.
For Audio CD and MP3/WMA/JPEG/Divx
®
CD, please see
“Program playback (CD)”
40
.
■ To change the program
Select Mode to “Program” (as step 2), press ◀/▶/▲/▼ to select
the track number you want to change, then press CLEAR.
Press Number buttons (0–9) to input the new track number.
■ To clear the program one by one
Select Mode to “Program”, press ◀/▶/▲/▼ to select the track
number. Then press CLEAR.
■ To clear all the programs
At the left column, press ▲/▼ to select “Clear Program”. Then
press ENTER.
Notes:
In playing back the Video CD with PBC, you cannot set
Program playback.
The program is canceled when you open the disc tray or
turn the power off.
1.
2.
•
•
DVD
VCD
Marking desired scenes
The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
1
Press MARKER during playback.
2
Select the blank Marker using ▲ or ▼.
Then press ENTER at the desired scene.
Repeat this procedure to set the other 2 scenes.•
3
Press MARKER to clear this display.
■ Returning to the scenes
1) Press MARKER during playback or stop mode.
2)
Press ▲ or ▼ to select the Marker 1-3.
3) Press ENTER.
Playback starts from the marked scene.•
1
Press PLAY MODE during playback or stop mode.
2
[DVD]
Press ▼ to select “Repeat”.
Press ENTER repeatedly to select “Chapter” or “Title”.
The unit automatically starts repeat playback after
finishing the current title or chapter.
[Video CD]
Press ▼ to select “Repeat”.
Press ENTER repeatedly to select “Track” or “All”.
The unit automatically starts repeat playback after
finishing the current track.
If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
•
[Audio CD and MP3/WMA/JPEG/DivX
®
CD]
Please see “Repeat playback (CD)”
39
.
3
Press PLAY MODE again to clear the screen.
■ To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
Some discs may not work with the repeat operation.
In case of Video CD with PBC, Repeat function is
prohibited during playback.
Chapter/Track repeat function is canceled whenever
SKIP
or is pressed.
•
•
•
DVD
VCD
Repeat playback
1
Press A-B RPT during playback.
The start point is selected.•
2
Press A-B RPT again.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point and returns to Point A automatically, then
starts again.
•
■ To resume normal playback
Press A-B RPT again.
“
Off
” appears on the screen.
DVD
VCD
CD
A-B Repeat playback
A-B repeat playback allows you to repeat a section between
two selected points.
Notes:
In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
You may not be able to set A-B Repeat for the scenes that
include multiple angles.
A-B Repeat playback does not work when Repeat playback
is activated.
You may not be able to set A-B Repeat during certain
scenes of the DVD.
A-B Repeat does not work with an interactive DVD, MP3/
WMA/JPEG CD.
In case of Video CD with PBC, A-B Repeat is prohibited.
•
•
•
•
•
•
■ To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Notes:
Some discs may not work with the marking operation.
The marking is canceled when you open the disc tray or turn
the power off.
Some subtitles recorded around the marker may fail to
appear.
In case of Video CD with PBC, Marker function is prohibited.
•
•
•
•
2K60121A_En_P32-37.indd 342K60121A_En_P32-37.indd 34 1/12/2007 7:59:21 PM1/12/2007 7:59:21 PM