Filter
Top Products
2828
Recording (VCR)
Preparation:
Turn ON the TV and select to the corresponding video
input.
Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
•
•
1
Load a cassette tape with the erase prevention tab
intact.
The DVD/VCR will automatically turn on.•
2
Press SP/SLP to select the desired tape speed SP
or SLP.
The tape counter and “SP” or “SLP” will appear on
the screen for about 4 seconds.
•
3
Select “TV” or “CABLE” to the appropriate position
24
.
4
Press Number buttons or CH +/– to select the
channel to be recorded.
TV mode direct channel selection:
All channels can be instantly selected by using two buttons.
(for example, to select channel 2, press “0”, then “2”. If you
press only “2”, channel selection will be delayed for two
seconds.) For channels 10 and above, press the 2 digits in
order.
CABLE mode direct channel selection:
1-9 Press 0 twice and then 1-9 as required.
Example: To select “2”, press 002.
10-12 Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for “12”.
13-99 Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
VHF/UHF/CABLE TV CHANNELS
TV CABLE TV
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
5
Press REC/OTR.
“ ” will appear on the screen for about 4 seconds
and “REC” will appear on the display window.
•
Recording a TV program
Recording and viewing the same TV program.
Recording a TV program
Press PAUSE/STEP to avoid recording unwanted
material. Press again to continue the recording.
“ ” will appear on screen for about 4 seconds. •
Notes:
The pause function will be released after 5 minutes to
prevent damage to the tape or the VCR. The VCR will
change to the STOP mode.
You can select a recording channel in the recording pause
mode.
•
•
Auto Rewind feature
This VCR will automatically rewind the tape when the tape has
ended (except during OTR and timer recording). It will also
eject the tape.
To stop recording
Recording one program while
watching another
While the VCR is recording, select your desired channel on
the TV.
When a TV is connected with an antenna cable only, press
TV/VCR to select the TV position.
The “VCR” display will go off and recording will continue.
Select the TV channel you want to watch by using the TV
channel selector.
Note:
Some Cable TV hookups do not permit viewing one
channel while recording another. See pages
16
and
17
.
Press STOP to stop recording.
“ ” will appear on screen for about 4 seconds.•
To stop recording temporarily
2K60121A.indb 282K60121A.indb 28 1/12/2007 3:50:12 PM1/12/2007 3:50:12 PM