Filter
Top Products
Menu Operations
16
3.2 Radio Channel List
Basically the operation of “Radio Channel List” is same as “TV Channel List”,
except that in the small channel window the radio Logo will be displayed.
3.3 Channel Setup
When you enter the “Channel Setup” menu
you will see a screen like beside:
1. Startup Channel: Press [OK] to enter
“Startup Channel” menu to see the
screen like showed beside:
¾ If you set of “Boot on Channel” to
“On” you can edit the following
two items. If the setting is “Off”
the box always starts with the
channel that was running when
the box has been switched off.
¾ On the “Mode” item you can select either “TV channel” or “Radio
channel”.
¾ On “Startup Channel” item you can open the channel list by pressing
[OK]. Then you can select the channel of you choice. Press [OK]
again to confirm.
2. Channel Play type: Use [Channel
Up/Down] to select, press [OK] to
enter “Channel Play Type” menu.
Here you can select the “playing
channels” as “All”, “Free” or
“Scrambled”.
3. If you select “Free” then all scrambled
channels will be skipped when you
change channels with [Volume
Up/Down].
Press [Exit] to leave the “Channel Setup” menu.