Filter
Top Products
Menu Operations
29
¾ When you select “Message”(reminding message) option in “Timer
Service” then you can enter additional data:
♦ Wakeup Message: Press [Volume Up/Down] to select the
category of the reminding message from Birthday, Anniversary
and General.
♦ Wakeup Date: Use the [Number] buttons to input your wakeup
date.
♦ On Time: Use the [Number] buttons to input your wakeup time. If
date and time are reached, no matter if the system is in standby
mode or in playing mode, it will automatically show a reminding
message.
♦ The message will be displayed on the screen until you press [Exit]
to close it.
Press [MENU] to leave the “Timer” menu.
3. Sleep Timer: Select “Sleep Timer” item and press [OK] to set the sleep
timer. You will see “Sleep timer OFF / Sleep timer 10 / Sleep timer 30 /
Sleep timer 60 / Sleep timer 90 / Sleep timer 120”.
If you set a sleep time, the system will change to standby mode after the
chosen time period.
5.4 OSD Setting
When you select “OSD Setting” you will
see a screen like beside:
1. Subtitle Display: Press [Volume
Up/Down] to select “On” or “Off”. If the
current channel has subtitle
information, it will be displayed if this
function is “On”. If this function is “Off”
subtitles won’t be displayed.
2. OSD Timeout: This setting determines
the duration the info window is
displayed on the screen when you change channels. Press [Volume
Up/Down] to set the time between 1 to 10 seconds.
3. OSD Transparency: With this parameter you can set the transparency of
the menus. Press [Volume Up/Down] select the value between 10%, 20%,
30%, 40% and “Off”(means no transparency function).
4. Load OSD Setting Default: If you want to reset your OSD settings to the
default settings then select this item and press [OK].
5. Press [MENU] button to leave the “OSD Setting” menu.