Triax TSR 1000 Satellite TV System User Manual


 
Remote Control & Panel Description
4
1.2 Rear Panel Description
1. IF OUT: Satellite output for cascading to other devices
Note: The operation of another receiver at the same time is only possible
with limited channel selection.
2. IF IN: Satellite input.
3. RS-232: Serial Port allowing software upgrades.
4. ANT IN: Connect the antenna of TV to Aerial IN.
5. AC IN: Mains input cable.
6. POWER ON/OFF: Allows to completely switch off the receiver.
7. VIDEO / AUDIO: HiFi outputs for stereo set or monitor.
8. TV SCART: Output SCART for the connection to a TV set.
9. TO TV: Output to TV.
10. VCR SCART: Output SCART for the connection to a VCR set.