Triax TSR 1000 Satellite TV System User Manual


 
Menu Operations
28
¾ NOTE: If the current channel
provides the correct time
information, you will see the
current time after you entered
“Time” menu. If the channel
doesn’t provide time information,
you have to input the date and
time information manually. The
most channels support the time
signal.
¾ Press [MENU] to leave the “Time” menu.
2. Timer: Select “Timer” item and press [OK] to enter the “Timer list” menu.
You can press [Channel Up/Down] to select a timer. Then press [OK] to
open the related timer menu.
¾ The current time will be displayed
in the first column. If the current
time is incorrect, please modify it
with the [Number] buttons.
¾ Timer Number: You can press
[Volume Up/Down] to switch the
Timer number. There are totally 8
timers.
¾ Timer Mode: Select how often the
timer is running: Once, Daily, Weekly, Monthly and Yearly, or switch
the timer: Off.
¾ Timer Service: Select between Channel(timer setting for channel
change and Wakeup/Sleep) and Message(reminding message).
¾ When you select “Channel”(timer setting for channel change and
Wakeup/Sleep) then you have further options you need to set:
Wakeup Channel: Press [OK] to enter the channel list and select
the channel you want to see.
Wakeup Date: Use number buttons to input your wakeup date.
On Time: Use number buttons to input your wakeup time. If date
and time are reached then no matter if the system is in standby
mode or in playing mode, it will automatically switch to the
channel you set and start to play.
Duration: Here you can set the time you want to see or play this
channel. After the time set the system will automatically switch to
standby mode. If you don’t want the box the be switched to
standby mode then set the duration to 00:00.