Filter
Top Products
Menu Operations
27
5.2 TV System
When you enter the “TV System” menu
you will see the screen like below:
1. Display Mode is used to switch the
display mode. You can select from
Auto / PAL / PAL-N / PAL-M /
NTSC3.58. Press [Volume Up/Down]
to switch the desired mode.
2. Aspect Mode is used to switch the
screen aspect ratio mode. You can
select from Auto / 4:3 PS / 4:3 LB /
16:9. Press [Volume Up/Down] to select the needed mode.
3. Video output is use for switching the screen aspect ratio mode. Now we
provide below options: RGB / CVBS. You can press [Volume Up/ Volume
Down] key to select each mode circularly.
4. VCR Loopthrough is use for switching STB master and VCR master. When
VCR Loopthrough is STB master mode, video output is available.
5. Select RF system between PAL B/G, PAL I, PAL D/K and NTSC M.
6. RF Channel: In case your TV is connected through RF modulator (UHF),
select output channel number you want.
7. Press [MENU] to close the “TV System” menu.
5.3 Time & Timer Setting
When you enter “Time & Timer Setting” a
menu with this 3 items will be opened.
1. Time: When you select “Time” and
press [OK] then you will see a window
like the one beside:
¾ GMT Usage: This item is used to
set the time by using the time
signal from the satellite. Press
[Volume Up/Down] to change the
setting.
¾ The “GMT Offset” item is only available when “GMT Usage” is set to
“On”. Press [Volume Up/Down] to set the “GMT Offset” value. With
every time you press the button the time offset will be
increased/decreased by half an hour.
¾ “Date” and “Time” items are only available when the “GMT Usage” is
set to “Off”. Press [Volume Up/Down] to select one item and use
number buttons to input time and date directly.