ViewSonic VS13915-1M Flat Panel Television User Manual


 
3
ViewSonic VT3205LED
ENGLISH
Getting Started
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the
wall, please consider the following guidelines:
•ReadtheImportantSafetyInstructions,atthestartofthismanual.
Do not install in a moist or wet environment. This equipment is intended for indoor use.
Do not install near heat source, orstrongmagneticelds.
Use only ViewSonicapproved wall-mounting brackets to support the LCD TV weight.
Before attaching the wall mount plate to the back cover, ensure the product is working.
•IfyourLCDTVisalreadysetupforfree-standingoperation,youneedtorstremovethe
stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the LCD TV.
•SettheLCDTVonatableorworksurface,placingthescreenfacedownonatowelor
woolen blanket to protect the screen surface from damage while installing plate.
•Before installing the LCD TV on the wall, ensure you have recorded the product serial
number on page (i) of the User Guide, as you will need the serial number to request
service should there be a service need.
•Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as
longerscrewsfoundinuniversal(non-ViewSonic)wallmountkitsmaydamagethe
power supply causing the unit to fail. The wall-mount screw type is M6 x L10.
Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 3cm of space surrounding any air-vents of your
LCD TV to allow adequate cooling during operation.
Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.
EnjoyyourViewSonicLCDTV!