ViewSonic VS13915-1M Flat Panel Television User Manual


  Open as PDF
of 63
 
18
ViewSonic VT3205LED
ENGLISH
Using the TV Features
Storing Channels into Memory
1. Press the MENUbuttontodisplaytheOSDmainmenu.
2.Press◄or►toselectthe“CHANNEL”menu,then
press ENTERor▼toenterthemenu.Press▲or▼
toselect“TVSource”,anduse◄or►toselectthe
antennaconnectionto“Air”or“Cable”.
Air:RFsignalprogramsby“Air”.
Cable: RF signal programs by “Cable”.
3.Press▲or▼toselect“AutoScan”,thenpress►to
enter.
4.Press▲or▼toselect“Scanallchannels”,“Digital
channelonly”,or“Analogchannelonly”andpress►to
performAutoScanfunction.
To stop scanning, press MENU at any time.
5.TheAutoScanscreenwillbeshown,andafteritis
done,thescreenwillreturntotherstfoundchannel.
Viewing the Menus
1. Press the MENUbuttontodisplaytheOSDmainmenu.
There are six top menus on the screen: PICTURE,
AUDIO,TIME,OPTION,LOCK,andCHANNEL.
(CHANNELmenucanonlybeenabledinTV
source.)
2.Press◄or►toselectyourdesiredtopmenu.
3. Press ENTERor▼toenterthemenuyouselect.
4.Use▲▼toselectthecontrolyouwanttoadjust.
5.Whenselectingthecontrolwith►,press►toenter
nextlevelmenuorenablethefunction.(►willonly
appear when the control is highlighted)
6.Press◄►toadjustorselectthesettings.
7.PressMENUtoexitfromtheOSDmenu.
 previous next