ViewSonic VS13915-1M Flat Panel Television User Manual


  Open as PDF
of 63
 
ENGLISH
38
Other Information
ViewSonic VT3205LED
3. Command Description
Length Total Byte of Message excluding “CR”
TV ID IdenticationforeachofTV
Command Type Identify command type,
“s”(0x73h):SetCommand
“g”(0x67h):GetCommand
“r”(0x72h):ReplyCommand
“p”(0x70h):RCUPass-through
“+” (0x2Bh) : Valid command Reply
“-” (0x2Dh) : Invalid command Reply
Command Functioncommandcode:OnebyteASCIIcode
Value[1~3] ThreebytesASCIIthatdenesthevalue
CR 0x0D
4. Set-Function Listing
ThePCcancontroltheLCDMonitorforspecicactions.TheSet-Functioncommandallows
youtocontroltheLCDmonitorbehaviorinaremotesitthroughtheRS232port.TheSet-
Function packet format consists of 11 bytes.
Set-Function description:
Length Total Byte of Message excluding “CR”
TV ID IdenticationforeachofTV.TheTVIDdoesn’tbesupportedbyHDTV“power
on” command.
If we want to set all TV settings, TV ID can use “99” to achieve, and it will not
have Reply command on this function.
Command Type Identify command type,
“s”(0x73h):SetCommand
Command Functioncommandcode:OnebyteASCIIcode
Value[1~3] ThreebytesASCIIthatdenesthevalue
CR 0x0D
Set-Function format:
Send (Command Type= “s”)
Name Length ID Command
Type
Command Value1 Value2 Value3 CR
Byte Count 1 Byte 2 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Bytes order 1 2~3 4 5 6 7 8 9
(Command Type= “s”, Only for HDTV power on)
Name Length Command
Type
Command Value1 Value2 Value3 CR
Byte Count 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Bytes order 1 2 3 4 5 6 7
 previous next