Specifying Protocol Settings
2-9
Using a TCP/IP Network (Windows/UNIX)
2
12
Press [▼] or [▲] to select <OFF> or <ON> ➞ press [Set].
If you select <ON>, the DNS server address will update automatically,
The selected mode is set.
13
Press [Stop] to return to the Standby mode.
Setting the Host Name
Follow the procedure below to specify the host name of your machine.
NOTE
It is much easier to enter the host name from the Remote UI. (See “Using a Web Browser
(Remote UI),” on p. 2-14.)
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [▼] or [▲] until <6.SYSTEM SETTINGS> appears ➞
press [Set].
IMPORTANT
If the prompt <PASSWORD> is displayed, enter the System Administrator’s
password using the numeric keys. For information on how to enter the System
Administrator’s password, see Chapter 4, “Restricting the Use of the Machine,” in
the Reference Guide.
➞
➞
Set
Stop
Data
Registration
Set
