Protocol Settings
3-10
Using a NetWare Network (Windows)
3
Using a Web Browser (Remote UI)
Instead of using the NetSpot, you can use a web browser (Remote UI) to specify
the protocol settings. For detailed procedure, see “Using a Web Browser (Remote
UI),” on p. 2-14.
NOTE
To specify the protocol settings using Remote UI from NetWare computers, you can
select Frame type. There are four frame types: Ethernet 802.2, Ethernet 802.3, Ethernet
II, and Ethernet SNAP.
1
Start the web browser ➞ enter the URL below in [Location] or
[Address] ➞ press [ENTER] on the keyboard.
2
Select [Administrator Mode] ➞ click [OK].
❑ Under [Device Manager] in the left column of the screen, click [Network].
❑ Under the Protocols heading, click [Edit] at the right of the TCP/IP protocol box.
❑ Specify the setting method for allocating the IP address of your machine.
3
Click [OK].
Using an FTP Client
You can use an FTP Client to specify the protocol settings. For detailed procedure,
see “Using an FTP Client,” on p. 2-20.
1
Start up the MS-DOS prompt or the Command prompt.
2
Execute the following command.
ftp <machine’s IP address>
❑ Enter “root” as the user name.
❑ Execute the following command to download the config (configuration) file.
get config
❑ Edit the downloaded config file using Notepad (or similar program).
❑ Execute the following command to upload the config file.
put config CONFIG
❑ To confirm the settings, execute the following command to reset the print
server.
get reset
