Setting Up a Computer for Printing
2-37
Using a TCP/IP Network (Windows/UNIX)
2
● Example using IBM-AIX
❑
Start the SMIT utility.
❑ Select [Print Spooling] ➞ [Print Queue Addition] ➞ click [Remote].
❑ Select [Standard Process Addition].
❑ Enter the desired additional print queue name in [Queue Name] and the
printer’s host name or IP address in [Remote Server Host Name].
❑ Enter “LP” in [Remote Server Queue Name].
❑ Enter “BSD” in [Remote Server Print Spooler Type].
NOTE
•
The admintool utility, SAM utility, and SMIT utility are apart of the operating system
you are using. For specific operating instructions, see the appropriate operating
system manual.
•
The above procedures are only examples. The setup procedures for your system
environment may differ.
The host computer settings are complete.
Printer Connection Method (IPP)
To print from a computer using the IPP (Internet Printing Protocol) print application,
you must know the printer’s IP address to specify the printer’s location on the
network.
Windows 95/98/Me/2000/XP
NOTE
For Windows 95/98/Me, install the IPP Client software for Windows 95/98/Me
provided by Microsoft, then restart your computer.
