Specifying Protocol Settings
2-16
Using a TCP/IP Network (Windows/UNIX)
2
4
Under the Protocols heading, click [Edit] at the right of the
TCP/IP protocol box.
Scroll down if TCP/IP protocol box is not visible.
The Edit TCP/IP Protocol Settings page is displayed.
5
Specify the setting method for allocating the IP address of
your machine.
To use [Use DHCP], [Use BOOTP], or [Use RARP] for allocating the IP
address, click the [On] radio button next to each selection.
If you select [Off] for [Use DHCP], [Use BOOTP], or [Use RARP], the machine will not
check for these protocols.
If neither DHCP, BOOTP, nor RARP can be used, specify the IP address in the [IP
Address] text box. The IP address speciļ¬ed here, is the one allocated.
