Setting Up a Computer for Printing
2-27
Using a TCP/IP Network (Windows/UNIX)
2
❑ Enter the host name or IP address of the printer in [Host Name or IP Address].
❑ Enter “LP” in [Printer Name] ➞ click [OK].
IMPORTANT
Before setting the port, check that the machine is connected to the network, and
that the machine is connected to a power source.
6
Click [OK] to enable the settings.
The printer driver and location settings are complete.
Windows 2000/XP
1
Install the printer driver. (See Chapter 1, “Before You Start
Using This Machine,” in the PCL Driver Guide.)
When the dialog box for selecting the type of printer appears, select [Local
printer] ➞ [Automatically detect and install my Plug and Play printer]. Do not
select [Network printer].
The port selection can be changed after installation. You can select any port,
such as [LPT1].
